Manometric explosion-proof temperature relay-sensor ТДМВ-102 | PAO Saransk Instrument Works

Manometric explosion-proof temperature relay-sensor ТДМВ-102

Manufacturer: PAO SARANSK INSTRUMENT WORKS
or send an application for spz@saranskpribor.ru
Documents

Руководство по эксплуатации ТДМВ-102

Сертификат соответствия ДДМВ-102, ТДМВ-102

Manometric explosion-proof temperature relay-sensors ТДМВ-102 (hereinafter – devices) are intended for monitoring and regulating the temperature of gaseous and liquid media in stationary refrigeration plants and other systems of coal mines, in indoor and outdoor explosive areas as per Ex marking, GOST IEC 60079-14, PUE (“Electrical Installations Code”) Chapter 7.3, and other regulatory documents governing the application of electrical equipment in explosive gaseous atmospheres as well as in underground pits and coal mines, and their surface structures.

Devices are also used for an alarm unit and to operate under conditions in which there is normally no blowing of the enclosure with dust-air flows, nor electrostatic charging of the enclosure by means of friction, electrostatic induction or contact with charged bodies.

Controlled medium is fresh water, air, freons, oils, diesel fuel and other liquids and gas with a maximum viscosity of 0.8 Pa×s, nonaggressive to the used structural materials.

Devices are fit for operation under conditions established for versions УХЛ2, В2,5 as per GOST 15150-69.

General specifications

1. Device designation, specified setpoint range, basic absolute error, actuation range and threshold return area value of devices are in compliance with those given in Table 1.

Table 1

Device designation

Specified setpoint range*, °С

Basic absolute error, °С, as maximum

Actuation range, °С, as maximum

Return area, °С, as maximum

uncontrollable

as maximum

ТДМВ-102.01.1

minus 20 to plus 10

±1.5

0.3°С – for devices without shroud; 0.5°С – for devices with thermal bulb shroud

5

ТДМВ-102.02.1

plus 5 to plus 45

ТДМВ-102.03.1

plus 10 to plus 60

ТДМВ-102.04.1

plus 50 to plus 130

±4

10

* “Specified setpoint range” – values of setpoints at which the requirements of technical conditions are satisfied for each device version.

 

Notes
1. Setting the device to a specific actuation setpoint shall be done by the manufacturer in compliance with the order.
Setpoint value shall be selected from the setpoint range in increments of 1°С.
2. If the order does not specify an actuation setpoint, devices shall be set by the manufacturer to the following actuation setpoints within the appropriate specified setpoint range:
ТДМВ-102.01 – 0°С ± 3°С;
ТДМВ-102.02 – plus 20°С ± 3°С;
ТДМВ-102.03 – plus 50°С ± 3°С;
ТДМВ-102.04 – plus 100°С ± 3°С. –page 40 of the Catalog

2. Maximum allowable temperature of the controlled medium for the devices is given in Table 2.

Table 2

Designation

Maximum allowable temperature of the controlled medium*, °С

ТДМВ-102.01

50

ТДМВ-102.02

ТДМВ-102.03

105

ТДМВ-102.04

145

* Maximum exposure duration is 5 min

3. Devices are designed for operation at contact loads specified in Table 3.

Table 3

Current type

Voltage, V

Switching power, W

Current, A

Сos ϕ, as minimum

Frequency, Hz

min.

max.

DC

12 to 24

60

0.1

AC

127; 220

0.1

6

0.6

50 or 60

Notes
1 Minimum value of switched current is 0.1 A with maximum inductance for DC of 5 mH.
2 It is not allowed to use devices for switching minimum currents if they were used at other current loads.


4. Devices are resistant to exposure of ambient temperature from minus 40 to plus 70°С.

5. As to dust or water ingress protection, devices are of version IP67 as per GOST 14254-96.

6. Weight of the device is 2.5 kg as maximum.

Designation structure

 

ТДМВ-102

Device designation examples:

1) ТДМВ-102 device with setpoint range from plus 10 to plus 60°С, with uncontrollable return area, with return area directed towards temperature increase in relation to the setpoint, with setpoint at plus 50°С, with a capillary length of 2.5 m
“Temperature relay-sensor ТДМВ-102.03.1.↑50°С-2,5 м ТУ 4218-005-97817222-14”;

2) ТДМВ-102 device with setpoint range from plus 5 to plus 60°С, with controllable return area, with return area directed towards temperature decrease in relation to the setpoint, with setpoint at plus 40°С, with a capillary length of 4 m, with installation kit К2
“Temperature relay-sensor ТДМВ-102.02.2.↓40°С-4 м, К2 ТУ 4218-005-97817222-14”. – page 40 of the Catalog

Overall and mounting dimensions 

ТДМВ-102

Figure 1 – Overall and mounting dimensions of ТДМВ-102 temperature relay-sensors