Differential pressure control switches ДЕМ-202 РАСКО | PAO Saransk Instrument Works

Differential pressure control switches ДЕМ-202 РАСКО

Manufacturer: PAO SARANSK INSTRUMENT WORKS
or send an application for spz@saranskpribor.ru
Documents

Декларация ДЕМ на ТР ТС

Руководство по экспуатации датчиков реле давления ДЕМ-102 Раско и разности давления ДЕМ-202Раско

Purpose

Differential pressure control switches are intended for signaling and relay control of differential pressure of operating medium by opening or closing electric contacts.

 

Scope of application:

- ventilation, air conditioning and cold supply systems;

- pump, compressor and turbine machine building;

- local automation systems at heat, water and power supply facilities.

 

Operating medium is water, air, oils, freons and other liquids and gas nonaggressive to steels and copper alloys.

They are very resistant to external affecting factors (impacts, vibration, oscillating motion, ingress of dust or water, impact of salt (sea) mist, moulds, etc.), and have a high switching stability of electric contacts.

Operating medium is water, air, oils, freons and other liquids and gas nonaggressive to steels and copper alloys.– page 19 of the Catalog
They are very resistant to external affecting factors (impacts, vibration, oscillating motion, ingress of dust or water, impact of salt (sea) mist, moulds, etc.), and have a high switching stability of electric contacts.

General specifications

Device designation

Setpoint thresholds, MPa

Return area, MPa

Maximum pressure, MPa

ДЕМ-102РАСКО-01-2

-0.065…0.6

0.06–0.4

2.2

ДЕМ-102РАСКО-02-2

0.1…1

0.1…0.3

2.5

ДЕМ-102РАСКО-03-2

0.5…2

0.2–0.5

4

ДЕМ-102РАСКО-05-2

0.5–3

0.3…1

4

ДЕМ-202РАСКО-01-2

0.055…0.5

0.05

2.2

ДЕМ-202РАСКО-02-2

0.02...0.2

0.03

2.2

The return area in ДЕМ-102 РАСКО devices is directed towards pressure decrease in relation to the setpoint. Upon pressure increase and reach of the value corresponding to a setpoint, contacts 1−5 shall open, and contacts 1−3 shall close; upon pressure decrease by the value of return area, contacts 1−5 shall close, and 1−3 – open.
The return area in ДЕМ-202 РАСКО devices is directed towards pressure increase in relation to the setpoint. Upon pressure decrease and reach of the value corresponding to a setpoint, contacts 1−5 shall close, and contacts 1−3 shall open; upon pressure increase by the value of return area, contacts 1−5 shall open, and contacts 1−3 shall close.
Devices with designation ending with number 2 shall have an electrical connector as per DIN 43650 C.

Operating medium temperature and ambient temperature is -40 to +85°С

Enclosure IP rating of the devices with IP64 connector

Device weight: ДЕМ-102 РАСКО – 0.7 kg
ДЕМ-202 РАСКО – 0.8 kg

Attachment nozzle connection is flared for pipeline as per GOST 28941.12-91

Switching capacity of the contacts:

  • - AC voltage is 127…380 V at frequency of 50 (60) Hz, at сos(φ)>0.6, switching current is 6 А as maximum;
  • - DC voltage is 24…220 V, at minimal current 0.05 А, switching power is 60 W;

Scope of delivery: device, certificate, coupling nuts with nipple; completed as an option with pulse tubes with outside diameter Ø=6 mm, installation kits КМ1 or КМ2.

Overall and attachment dimensions of ДЕМ-102 РАСКО and ДЕМ-202 РАСКО 

Датчики-реле давления ДЕМ-102 РАСКО и датчики-реле разности давлений ДЕМ-202 РАСКО

Differential pressure control switch ДЕМ-202 РАСКО with DIN43650 C connector. 

Датчики-реле давления ДЕМ-102 РАСКО и датчики-реле разности давлений ДЕМ-202 РАСКО

Pressure switch ДЕМ-102 РАСКО with DIN43650 C connector.

Electric circuit diagram 

Датчики-реле давления ДЕМ-102 РАСКО и датчики-реле разности давлений ДЕМ-202 РАСКО

When ordering a device, specify the following data: description, device designation, designation of technical conditions.

Example of ordering the device

ДЕМ-202 РАСКО-01-2 with EN 17301-803 connector

“Differential pressure control switch ДЕМ-202РАСКО-01-2 ТУ 4212-140-00227471-2010”.