Pressure switches ДЕМ-105М-РАСКО | PAO Saransk Instrument Works

Pressure switches ДЕМ-105М-РАСКО

Manufacturer: PAO SARANSK INSTRUMENT WORKS
or send an application for spz@saranskpribor.ru
Documents

Декларация ДЕМ на ТР ТС

Папорт ДЕМ-105М-Р,ДЕМ105М1-Р, датчики реле разности давления ДЕМ-202М-Р

Pressure switches ДЕМ-105М-РАСКО (hereinafter – devices) intended for monitoring and two-step regulation of pressure in alarm systems, protection and control systems for pump, compressor and refrigeration plants, diesel engines, locomotive type and other systems. Devices are manufactured for relay control of the operating medium pressure and differential pressure by opening or closing electric contacts.

Scope of application:

- ventilation, air conditioning and cold supply systems;

- pump, compressor and turbine machine building;

- local automation systems at heat, water and power supply facilities.

Controlled medium is water, air, freons, oils and other liquids and gas, with a maximum viscosity of 0.8 Pa˙s, nonaggressive to the used structural materials.

Devices are fit for operation under conditions established for version ОМ5 as per GOST 15150, bur for operation within the temperature range from minus 20 to plus 85oC.

Devices are fitted with electrical connector as per DIN 43650.

The devices are supplied with coupling thread М12х1.5, G1/4 and G1/2.

Guarantee period of storage is 18 months since the date of manufacture.

Guarantee service life is 12 months since the date of commissioning within the guarantee period of storage. – page 22 of the Catalog

GENERAL SPECIFICATIONS

1. Device designation, setpoint thresholds, basic error, actuation range and threshold return area value of devices are in compliance with those given in Table 1.

Table 1

Device designation

Setpoint thresholds*, MPa

Basic error, MPa, as maximum

Actuation range, MPa, As maximum

Return area uncontrollable, MPa,as maximum

ДЕМ-105М-РАСКО-01

0.01 to 0.2

± 0.02

0.005

0.02

ДЕМ-105М-РАСКО-02

0.02 to 1.0

± 0.05

0.01

0.05

* “Setpoint thresholds” – values of setpoints at which the requirements of technical conditions are satisfied for each device version.

Notes

1. Setting the device to a specific actuation setpoint shall be done by the manufacturer in compliance with the order.

2. The return area of devices is directed towards pressure decrease in relation to the setpoint.

3. The customer is allowed to reset a setpoint within the range of values specified in Table 1. – page 22 of the Catalog

2. Maximum allowable pressure of the controlled medium is given in Table 2.

Table 2

 Designation

 Maximum allowable pressure

of the controlled medium*. MPa

ДЕМ-105М-РАСКО-01

ДЕМ-105М-РАСКО-02

1.5

____________

* Maximum exposure duration is 5 min

3. Devices are designed for operation at contact loads specified in Table 3.

Table 3

 Current type

Voltage, V

Current, A

cos j, minimum

Frequency, Hz

min.

max.

 

DC

DC

30

0.1

1

-

-

 

AC

AC

250

1

10

0.6

50; 60

 

4. The devices are resistant to and preserve parameters under conditions of operating decreased temperature of minus 20oC and operating increased temperature of plus 85oC of ambient air.

5. As to dust or water ingress protection, devices are of version IP64.

6. Weight of the device is 1.3 kg as maximum.

Ordering information for ДЕМ-105М-РАСКО devices:

1) ДЕМ-105М-РАСКО device with setpoint thresholds from 0.02 to 1 MPa without indication of specific setpoint value with М-12х1.5 thread:

“Pressure switch ДЕМ-105М-РАСКО-02 САФП.422319.001 ТУ”.

2) ДЕМ-105М-РАСКО device with setpoint thresholds from 0.02 to 1 MPa and setpoint at 0.6 MPa with G1/4 thread:

“Pressure switch ДЕМ-105М-РАСКО-02-0,6МПа-G1/4 САФП.422319.001 ТУ”. – page 23 of the Catalog

OVERALL AND MOUNTING DIMENSIONS

Figure 1 – Overall and mounting dimensions of ДЕМ-105М-РАСКО pressure switches

ELECTRIC CIRCUIT DIAGRAM 

 

 

Connector designation

Document designation

ХР1

XS1

Base as per EN 175301-803

Electric connector GDA4090S61 form А

EN 175301-803

(DIN43650)

Figure 2 – Electric circuit diagram of ДЕМ-105М-РАСКО pressure switches